Heavy Duty Reinforced w/ Batt (Rolls)

Heavy Duty Reinforced, White / Black facing / laminated to certified batt fiberglass in various R value thickness. Polypropylene film, fiberglass and polyester scrim, 30# natural kraft, metallized polyester film that is tough, strong and high abuse resistant, chemical resistance is good and also provides an enhanced install appearance. See specification sheet for details. 770-781-8279 larry@lthsteelstructures.com

Heavy Duty Reinforced, White / Black facing
3" R-10 WMP50 fiber reinforced facing / radiant barrier = various widths x 100 ft lengths
4" R-13 WMP50 fiber reinforced facing / radiant barrier = various widths x 75 ft lengths
6" R-19 WMP50 fiber reinforced facing / radiant barrier = various widths x 50 ft lengths
8.00" R-25 WMP50 fiber reinforced facing / radiant barrier = various widths x 30 ft lengths
9.25" R-30 WMP50 fiber reinforced facing / radiant barrier = various widths x 25 ft lengths

Sold by the square feet with various fiberglass thermal R value batt thickness

* Note: For 24" width, tabs are wider than normal and may need to be trimmed during installation.

* Note: ( R25 8.00 ) and or ( R30 9.25 ) inch thickness, one piece laminated batt is limited in supply for small quantity orders - if supply is not available to meet the schedules for delivery we supply the 2 piece materials which is R25 and R30 with one piece laminated with the facing choice and the other piece un faced batt to apply for the total thickness needed. The two piece system can be more diversified facing choices and the lengths you may need for the project versus the 8.00 or 9.25 inch thickness. One piece R25 and R30 is available only in the 30 ft lengths and 25 ft lengths..