Standard Reinforced w/ Batt (Bulk - Per SqFt)
VRR-Plus is a low cost film/film vapor retarder product with a .03 perm (WVTR )to be used in a high humidity environment with a reinforced metal building insulation with 30 lb of tensile strength and 90 psi puncture testing consisting of polypropylene scrim film with a metalized polyester film laminated to back of the facing for reflective heat radiation. Meets many certifications and good luminous light reflectivity also available in black color with various batt thickness R values and roll widths. See specifications VRR-Plus for details. 770-781-8279 larry@lthsteelstructures.com
Standard Reinforced, White / Black facing
1-7/8" R-6 (not certified)VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 100 ft lengths
3" R-10 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 100 ft lengths
3-1/2" R-11 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 100 lengths
4" R-13 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 75 ft lengths
6" R-19 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 50 ft lengths
8.0" R-25 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 30 ft lengths
9.25" R-30 VRR-PLUS fiber reinforced facing / radiant barrier = various widths x 25 ft lengths
Sold by the square feet with various fiberglass thermal R value batt thickness
* Note: For 24" width, tabs are wider than normal and may need to be trimmed during installation.
* Note: ( R25 8.0 ) and or ( R30 9.25 ) inch thickness, one piece laminated batt is limited in supply for small quantity orders - if supply is not available to meet the schedules for delivery we supply the 2 piece materials which is R25 and R30 with one piece laminated with the facing choice and the other piece un faced batt to apply for the total thickness needed. The two piece system can be more diversified facing choices and the lengths you may need for the project versus the one piece 8.00 or 9.25 inch thickness. One piece R25 and R30 is available only in the 30 ft and 25 ft maximum lengths.
For small quantities, the minimum shipping charge still applies, due to factory cutting, packing, and shipping fees.